RNAscope™ 2.5 LSx Reagent Kit-RED
Probe Compatibility
The RNAscope 2.5 LSx reagents utilize the existing RNAscope 2.5 LS Probes for optimal performance.
Simple and Rapid Run Set Up
The RNAscope 2.5 LSx Reagent Kit- RED with pre-assembled reagent trays significantly decreases the set up time at the bench and instrument. Furthermore, the barcoded containers enable accurate scanning and recording of reagents lot numbers. Run preparation is simple:
- Scan and register trays and reagents
- Establish run parameters
- Select staining protocol
- Start your run
Product Configuration
|
Reagent |
Tray position |
Quantity |
Storage |
|---|---|---|---|
|
RNAscope 2.5 LSx Rinse |
Tray 1, positions 1–2 |
27 mL x 2 containers |
2–8°C |
|
RNAscope 2.5 LSx Hematoxylin |
Tray 1, position 3 |
9 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx Red Part A |
Tray 1, position 4 |
4.5 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx Red Part B |
Tray 1, position 5 |
1 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx Red Part C |
Tray 1, position 6 |
1 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx Red Part D |
Tray 1, position 7 |
30.5 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx Bluing |
Tray 1, position 6 |
9 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx H2O2 |
Tray 2, position 1 |
9 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx AMP 1 RED |
Tray 2, position 2 |
18 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx AMP 2 RED |
Tray 2, position 3 |
18 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx AMP 3 RED |
Tray 2, position 4 |
18 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx AMP 4 RED |
Tray 2, position 5 |
18 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx AMP 5 RED |
Tray 2, position 6 |
18 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx AMP 6 RED |
Tray 2, position 7 |
18 mL x 1 container |
2–8°C |
|
RNAscope 2.5 LSx Protease |
Tray 2, position 8 |
12 mL x 1 container |
2–8°C |
